Drum Mix Asphalt Plants
20-100 TPH continuous producing drum mix asphalt plants, low cost. easy installation,to match the municipal roads projects.
● Automation control system
● Optional configuration as customers’ request
● Continuous high-efficiency production
● Fully pre-tested in factory
● Inverter controlled draft fan
Drumsun DHB/MDHB series consist of cold feed system,burner,dry & mix drum,dust collector,
bitumen supply system,PLC control system.
Features
Cold Feed Unit
Cold feed system consist of discharge belts and aggregate
collecting belt. The belt speed adjusted by AC drive and inverter.
The sand bin equipped the vibrator to void blocking.
Drying Drum
The gearbox motor drive the drying drum.There is 50 mm
thermal insulation material outside the drum. Keep the temperature
inside and make sure the complete drying.
Burner
The burner is optional. The fuel can be gas or oil. The fuel can be
burned adequately in the drum mix asphalt plants.
Aggregate Elevator
The special design of hot elevator for drum mix asphalt plants.
The asphalt can be produced continuously for using this.
PLC Automation System
in our drum mix asphalt plants.You can do the management like Temperature control, discharge gate
control,weight control, electrical control,etc.
Control Cabin
The control cabin equipped with emergency shut-down system,and
it is the centre of the whole equipment.
Options
| Options |
| Thermal insulation on the aggregate dryer drum |
| Mobile or transportable secondary dust filtration systems |
| Mobile/static bitumen, filler or mixed material storage systems |
| Heavy oil, gas or multi-fuel burners |
| Hydraulic jacking legs to raise the mixing section |
Specifications
| Units | STD20 | STD40 | STD60 | |
|---|---|---|---|---|
| Plant Capacity | ||||
| Capacity | TPH | 20 | 40 | 60 |
| Cold Feed | ||||
| Hopper Capacity | m³ | 4 | 4 | 4 |
| Hopper Loading Width | M | 2 | 3 | 3 |
| Belt Feeder Length | MM | 3400 | 3,400 | 3400 |
| Belt Width | MM | 500 | 500 | 500 |
| Belt Feeder Drive | KW | 1.5*3 | 1.5*4 | 2.2*4 |
| Vibrator Fitted to Sand Hopper | YES | YES | YES | |
| Collecting Conveyor Width | MM | 500 | 500 | 500 |
| Collecting Conveyor Drive | KW | 4 | 4 | 4 |
| Aggregate Dryer | ||||
| Dryer Drum Diameter | MM | 1,000 | 1,200 | 1,500 |
| Dryer Drum Length | MM | 4,500 | 5,000 | 6,500 |
| Dryer Drive | KW | 6 | 11 | 22 |
| Dryer Capacity | TPH | 30 | 50 | 70 |
| Burner(oil) | ||||
| Capacity | KG/H | 300 | 450 | 500 |
| Fuel pump motor | KW | 2 | 4 | 4 |
| Air-blower motor | KW | 8 | 11 | 11 |
| Hot Stone Elevator | ||||
| Elevator Capacity | TPH | 30 | 50 | 70 |
| Elevator Drive | KW | 6 | 8 | 8 |
| Mixed Asphalt storage silo | ||||
| storage silo | m³ | 2 | 3 | 4 |
| Unload height | M | 3 | 3 | 3 |
| Travelling Chasis (optional) | ||||
| Chasis length | MM | 6,500 | 6,500 | 6,500 |
| Chasis width | MM | 2,210 | 2,210 | 2,210 |
| Chasis height | MM | 620 | 620 | 620 |
| Front axle/rear axle | MM | 2,100 | 2,100 | 2,100 |
| Tyres | PCS | 8*10.00-R20 | 8*10.00-R20 | 8*10.00-R20 |
| Units | STD80 | STD100 | |
|---|---|---|---|
| Plant Capacity | |||
| Capacity | TPH | 80 | 100 |
| Cold Feed | |||
| Hopper Capacity | m³ | 6 | 7 |
| Hopper Loading Width | M | 3 | 3 |
| Belt Feeder Length | MM | 3,400 | 3,400 |
| Belt Width | MM | 500 | 500 |
| Belt Feeder Drive | KW | 2.2*4 | 2.2*4 |
| Vibrator Fitted to Sand Hopper | YES | YES | |
| Collecting Conveyor Width | MM | 600 | 600 |
| Collecting Conveyor Drive | KW | 4 | 4 |
| Aggregate Dryer | |||
| Dryer Drum Diameter | MM | 1,500 | 1,500 |
| Dryer Drum Length | MM | 6,650 | 7,500 |
| Dryer Drive | KW | 7.5*4 | 7.5*4 |
| Dryer Capacity | TPH | 90 | 110 |
| Burner(oil) | |||
| Capacity | KG/H | 600 | 750 |
| Fuel pump motor | KW | 4 | 4 |
| Air-blower motor | KW | 15 | 30 |
| Hot Stone Elevator | |||
| Elevator Capacity | TPH | 90 | 110 |
| Elevator Drive | KW | 11 | 11 |
| Mixed Asphalt storage silo | |||
| storage silo | m³ | 5 | 6 |
| Unload height | M | 3 | 3 |
| Travelling Chasis (optional) | |||
| Chasis length | MM | 11,500 | 11,500 |
| Chasis width | MM | 2230 | 2230 |
| Chasis height | MM | 650 | 650 |
| Front axle/rear axle | MM | 2230 | 2230 |
| Tyres | PCS | 8*10.00-R20 | 8*10.00-R20 |
